How to clean the iron

The new iron does an excellent job with its tasks, but over time it may start to upset you. With the wrong choice of temperature and / or ironing method, a burner appears very quickly on the iron.

As a result, it can not only annoy, but also spoil your favorite clothes. Under such conditions, it is rather difficult to create home comfort.

We have prepared for you the most effective ways to clean your iron at home. At first we will consider methods of cleaning from a burn on a sole, and then from a scum inside the iron.

How to clean the iron from the burn

First of all, you should know that before you start cleaning you need to find out the characteristics of the iron. For example, a Teflon or ceramic sole cannot be processed with abrasive materials: they use other methods of cleaning.

  1. Salt

Put enough salt on the paper, and then put it on it with a heated iron. Do this until all burns are gone.

  1. Paraffin candle

Take the usual paraffin candle and wrap it with cotton fabric. Then start rubbing such a material working part of the iron.

However, you should not forget that in the process of such a cleaning, the wax of the candle will melt and drip downwards, therefore prepare in advance some kind of container.

If the sole of your iron is embossed, then at the end of the cleaning it should be checked and, if necessary, clean the holes for steam. If you do not, paraffin stuck in the grooves, stain your stuff.

  1. Hydrogen peroxide

Moisten a cotton swab in a 3% solution of hydrogen peroxide, and then begin to rub black spots with a cold iron. Peroxide can completely dissolve plaque, or significantly facilitate its removal.

  1. Table Vinegar

Wipe the working part of the cold iron swab, moisten it previously in vinegar. If you do not manage to remove dark spots, then you need to add liquid ammonia in vinegar in a 1: 1 ratio.

Before starting the procedure, pre-cover the burned area with a cloth soaked in vinegar. In two hours time, the plaque will dissolve, and its remains will be easily wiped off with a napkin.

  1. Baking soda

Stir a couple of tablespoons of baking soda in a glass of water. Then moisten a tampon in this solution and wipe a cold sole with it. At the very end, wipe the working part of the iron with a damp cloth.

  1. Nail Polish Remover

If you suddenly notice that polyethylene has stuck to the sole of your iron - do not despair. Take a nail polish remover and get rid of this "foreign body".

If possible, do not touch the casing during cleaning, as the solvent may damage the plastic.

Do not use sandpaper or any other abrasive materials to clean the electric iron. Scratches will cause the equipment to become unusable.

Indelible pencil

The easiest way to remove soot is to buy a special pencil in the hardware store for cleaning the iron, it is inexpensive, and it can cope with its task for 5+.

To use it is elementary: heat the iron, and carefully blot its sole with this pencil, as soon as the tool “eats” the carbon, spend it with an iron on a piece of lint-free fabric.

The only drawback of this method is the sharp smell of ammonia from which, in general, this pencil consists.

This method is certainly very effective, but what to do when you need to iron the clothes urgently, and there is no time left to go to the store to buy a "magic pencil". We'll have to deal with Nagar improvised means.

How to prevent the formation of a burn

If you want to forget once and for all what a burner is, we recommend you follow a few simple rules:

  • Select the appropriate temperature for a particular matter.
  • To iron delicate things only through wet gauze.
  • At the end of each ironing wipe the iron sole with a napkin.

How to clean the iron from scale

If you notice that while using steam, red spots appear on things, this means that scum has formed inside the iron.

By the way, this is a fairly common problem, since on the Internet they often ask appropriate questions.

We have prepared for you a solution to this problem. To get rid of scale inside the iron can be three reliable ways.

Method 1. Self-cleaning function

Many modern irons have a self-cleaning function. After reading the instructions (which are too lazy to do so many) to eliminate scale, you can successfully get rid of it. Usually such a procedure looks like this:

  1. The maximum amount of water is poured into the compartment.
  2. The temperature controller is set to maximum.
  3. The iron heats up, cools down, and then heats up again.
  4. The device keeps on a slope, over some capacity.
  5. The self-cleaning button is pressed, with the result that all the scale comes out of the steam holes.

At the very end, you need to rinse the compartment 2-3 times with clean water and wipe the device. Everything, you successfully cleaned the iron from the scale inside.

Method 2. Citric acid

In a glass of water you need to add one tablespoon of citric acid. This composition should be poured into the appropriate compartment and turn on the iron at the maximum temperature.

Then you need to trot the iron and blow off steam. During this procedure, all the scum will come out with the steam. At the end of cleaning, rinse the compartment and remove any dirt from your instrument.

Method 3. Sparkling mineral water

Since there are acids in the soda, they can perfectly dissolve all the scale. To do this, simply pour mineral water into the compartment and follow the above instructions.

Although if you do not have the function of self-cleaning, we recommend cleaning after all with the help of citric acid, and not mineral water.

How to prevent the formation of scale

If you want to permanently get rid of problems with scale, you initially need to monitor the quality of water used. Here are some tips on fluid selection:

  1. Distilled water: sold in many supermarkets and at all gas stations.
  2. Bottled or purified.
  3. Otstoyannaya water: in a few hours all the salts will be at the bottom.

Choice of iron

In the end we will give some tips that will help you decide on the choice of purchase. We hope that this information will be useful to you.

Iron contamination is formed from melted or burnt matter fibers, textile dyes and limescale particles. That is why it is so important to know what the sole is made of.

Traditional materials are aluminum and stainless steel. They warm up quickly and are relatively inexpensive. However, fabric fibers, especially synthetic and wool, easily adhere to them.

To solve this problem, manufacturers apply various coatings on the sole. Here are the most common ones:

  • Titanium. Pros - durable, resistant to mechanical damage and scratches. Cons - long warming, expensive.
  • Ceramics and glass ceramics. Pluses - provide easy sliding, quick cleaning, uniform heating. Cons - fragility, a tendency to chipping, cracking.
  • Teflon. Pros - artificial fabrics do not stick to it, carbon does not form. Cons - easy to scratch.
  • Sapphire (mineral crumb). Pros - resistance to damage, can be brushed with a metal brush. Cons - high price.
  • Enamel. Pros - durable and smooth coating. Cons one - the high cost.

Many brands combine different types of sputtering, for example, titanium with sapphire or ceramics with silicon. In addition, some models include lining for delicate materials to protect them from burning or melting.

Do you have any preferences when choosing / buying an iron, or cleaning it? If yes - write about it in the comments.

Well, now you know how to clean the iron at home, and we told you the most popular options for cleaning the soles of the burner, and from the scale inside.

Watch the video: How To Clean Iron Bottom - EASY (March 2020).